Pro Gen4 12MP Fisheye

Camera Features	Pro Gen4 12MP Fisheye
Alarm Input/Output	1 input / 1 output
Corridor Mode	N/A
Day/Night	True D/N ICR
Dimensions	ø150mm x57mm (5.9 x 2.24 in)
Environment Rating	Indoor & Outdoor
Ethernet	10/100/1000Base-T Ethernet, RJ45, auto sensing
Field of View	180° (diagonal), 165° (horizontal, vertical)
Focal Length	1.6 mm
H.264	Yes
H.265	Yes
Housing Color	RAL 9003 - Signal White
Imager	Sony IMX 412 1/2.3” CMOS Image Sensor, 1.55um
IntelliZip	Yes
IR Distance	15 m (50 feet)
IR Illuminator	Yes
Lens Type	Glass Aspherical
Max Frame Rate	30ips @ 12MP
Minimum Illumination	Color - 0.7 lux; B/W - 0.13 lux; 0 lux with IR
MJPEG	Yes
Motion Detection	Yes
Onboard Storage	Micro SDXC 512GB
ONVIF Compliant	ONVIF profile S, G, T, M
Operating Temperature	IR on: -40°C to +50°C (-40°F to 122°F); IR Off: -40°C to +55°C (-40°F to 131°F)
Outdoor Rating	IP66/IP67 & NEMA 4X
Power Draw	POE: 11.89W AC: 11.77W
Power Input	24VAC, Power over Ethernet (PoE) IEEE 802.3af Type 1 Class 3
Privacy Zones	9
Resolution Options	Stream 1 --- Fisheye: 2992x2992 (1:1) 9MP. 2048x2048 (1:1) 4MP; Dewarped: 2688x1512 (16:9) 4MP, 1920x1080 (16:9) 2MP Stream 2 --- Fisheye: 2048x2048 (1:1) 4MP , 960x960 (1:1), 640 x 640 (1:1), 384x384 (1:1); Dewarped: 1920x1080 (16:9) 2MP, 1664x936 (16:9) PAL+, 1280x720 (16:9) 1MP, 1024x576 (16:9), 640 x 360 (16:9) nHD, 480 x 272, 384x288 Stream 3 --- Fisheye: 960x960 (1:1)* (Client Mode), 640 x 640 (1:1) (Client Mode), 384x384 (1:1) (Client Mode), N/A (Edge Mode); Dewarped: N/A * Available if Stream1 is 4MP only
SIM card
Simultaneous Users	3
Supported Protocols	IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF, ARP, CIFS
TrickleStor	Yes
Vandal-Resistant	IK10
Video Streams	Client: Triple ; Edge Dewarp: Dual
Weight	0.7 kg ( 1.54 lb)
Wide Dynamic Range	True WDR

Model No.
IPS12-F27-OIA4	Illustra Pro Gen4 12MP Fisheye, TDN w/IR, TWDR, IP66/67, IK10

1 x Illustra Pro Gen4 12MP Fisheye Camera
1 x Flat bracket
1 x Safety wire
4 x Tapping screws and 4 x Plastic anchors
1 x Torx wrench
1 x 2 pin terminal block
1 x 8 pin terminal block
1 x Printed Quick Start Guide
1 x Mounting template sticker
1 x Mounting thread screw
1 x Waterproof rubber
4 x Standoffs (for use with the wall mount accessory)
4 x Phillips screws (for use with the wall mount accessory)
1 x Plastic adaptor plate (for use with the pendant cap accessory)
2 x M4 screws (for use with the pendant cap accessory)
4 x Phillips screws (for use with the pendant cap accessory)

Request more information / quote

Contact / Request a Quote

First name

Last name

Company Name

Country

State/Region

Job Function

Business Phone

Nature of Inquiry

Please identify the reason of your inquiry

Email Consent

Yes, I wish to receive marketing emails about security solutions from Johnson Controls Security

No, I do not wish to receive marketing emails about security solutions from Johnson Controls Security

Privacy Notice

By completing the above form and checking this box you confirm that you have read, understood and accepted our Privacy terms as well as our Cookie terms. Read our Privacy Policy

Please select your preferred site

This site uses cookies to offer you a better browsing experience. By continue to navigate through this site or by clicking Approve, you consent to the use of cookies on your device as described in our privacy notice. Read our privacy policy

Approve