Smart Elevated Skin Temperature Scanning Solution
The Tyco Illustra Pro Thermal EST Camera, being contactless and therefore non-invasive, is ideal for deployment at controlled entrances to areas and facilities where initial skin temperature measurement is needed for staff and visitors. With a ±0.2°C / 0.4°F accuracy tolerance, in single person scanning mode, at an effective distance of 1 to 2 meters (3.3 to 6.6 feet), this elevated skin temperature scanning solution provides a high degree of flexibility to meet the individual situational awareness requirements of a wide variety of installations.
The Tyco Illustra Pro Thermal EST is not FDA-cleared or approved.
In accordance with the FDA’s “Enforcement Policy for Telethermographic Systems During the Coronavirus Disease 2019 (COVID-19) Public Health Emergency” (April 2020) please note the following with respect to the Tyco Illustra Pro Thermal EST:
• The temperature measurement function of the Tyco Illustra Pro Thermal EST should not be solely or primarily relied upon to diagnose or exclude a diagnosis of COVID-19, or any other disease;
• Elevated body temperature in the context of use should be confirmed with secondary evaluation methods (e.g., an NCIT or clinical grade contact thermometer);
• Public health officials, through their experience with the device in the particular environment of use, should determine the significance of any fever or elevated temperature based on the skin telethermographic temperature measurement;
• The technology should be used to measure only one subject’s temperature at a time;
• Visible thermal patterns are only intended for locating the points from which to extract the thermal measurement.
Camera Accessories
Camera Features | Pro Thermal EST Camera |
DUAL IMAGER CAMERA - THERMAL CAMERA | |
Detector Type | Amorphous-silicon Bolometers |
Pixel Pitch | 17μm |
Infrared Spectral Range | 8~14μm |
Effective Pixels | 384 × 288 |
Noise Equivalent Temperature Difference | <35mK |
Thermal Response Time | ≈40ms |
Lens Type | Fixed |
Focal Length | 12mm@F1.0 |
Field of View | Horizontal 29.7°, Vertical 22.5° |
DUAL IMAGER CAMERA - VISIBLE CAMERA | |
Imager | 1 / 2.7" 5MP Progressive CMOS |
Effective Pixels | 2592 x 1944 |
Min. Illumination | Color 0.012 Lux @ F2.0 | B/W 0.0012 Lux @F2.0, 0 Lux with IR |
Shutter Speed | 1/30 s ~ 1 / 10,000 s |
S/N Ratio | ≥52 dB |
Lens Type | Fixed |
Focal Length | 8mm |
Field of View | Horizontal 38°, Vertical 27.5° |
Lens Mount | M12 |
VIDEO | |
Video Compression | H.264 / H.265 / MJPEG |
H.264 Compression Standard | Base Line / Main Profile / High Profile |
H.265 Compression Standard | Main Profile @ Leve4.1 High Tier |
Resolution | Visible: 5MP (2592x1944), 4MP (2592×1520), 2560x1440, 3MP (2304×1296), 1080P (1920×1080), 720P (1280×720), D1 (720x576), 480x240, CIF (352x240) | Thermal: 704x576 (Upscaled from 384x288) |
Max.Frame Rate | Visible: 30fps @ all resolution. Thermal: 30fps @ 704x576 (Upscaled) |
Video Bit Rate | 64 Kbps ~ 5 Mbps |
Multiple Streaming | Triple stream |
Main Stream | Visible: 2592x1944, 2592x1520, 2304x1296, 1920x1080, 1280x720 | Thermal: 704x576 (Upscaled from 384x288) |
Second Stream | Visible: 1280x720, 704x480, 352x240 |
Third Stream | Visible: 704x576, 480x240, 352x288 |
Bitrate Control | VBR / CBR |
Quality Control | 5 levels under VBR; Freely adjustable under CBR |
Image Setting | ROI, Saturation, Brightness, Chroma, Contrast, Wide Dynamic, Sharpen, NR. |
AUDIO | |
Audio Communication | 1CH audio input; 1CH built-in speaker |
Audio Compression Format | G .711A, G.711U |
Audio Bit Rate | 128Kbps |
OPERATIONAL | |
Day & Night | True Day/Night with Auto IR Cut Filter |
Backlight Compensation | BLC/HLC |
Effective IR Distance | 20m (65.6ft) |
Digital Noise Reduction | 2D/3D DNR |
Digital Zoom | Yes |
Video Privacy | 4 zones video mask |
Smart Codec | 8 zones ROI |
Display Mode | Visible only, Picture-in-picture, Dual Window |
Intelligent Video Analytics | Visible Camera:- Line crossing direction, Object Abandoned / Removed, Enter an area, Motion detection | Thermal Camera:- Elevated Skin Temperature Detection |
Alarm Triggers | Alarm in, Intelligent video analytics, Network disconnect, SD card full, SD card error |
Backfilling iAPI3 Temperature | iAPI3 |
TEMPERATURE DETECTION | |
Detection mode | Multiple point forehead skin temperature detection |
Detection preset | Single Face (in accordance with IEC standards) |
Effective Distance | 1~2m (3.3~6.6ft) in Single Face usage mode |
Temperature alarm | Over temperature / Temperature anomaly |
Response Time | Less than 50ms |
Calibration | Automatic calibration with External Temperature Reference Source (ETRS) |
Accuracy | ±0.2oC / 0.4oF with External Temperature Reference Source (ETRS) calibration |
NETWORK | |
Network Protocol | TCP / IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, SNMP, UPnP, Unicast, Multicast |
Cyber Security | HTTPS / IP Filter / IEEE 802.1X / Blacklist & white list / account security |
Online Connection | Support simultaneous monitoring for up to 10 users |
API | ONVIF, iAPI3 |
INTERFACE | |
Network | RJ45 |
Audio | 1-CH audio input; 1-CH built-in speaker |
Alarm | Alarm in/out, Built-in sound-light alarm, Customizable voice alarm |
Hardware Reset | Supported |
ENVIRONMENTAL | |
Operating Temperature | 0 °C ~ 35 °C (32 °F ~ 95 °F) |
Operating Humidity | 10 % ~ 90 % relative humidity |
Ingress Protection | IP40 |
GENERAL | |
Power Supply | DC12V / PoE |
Power Consumption | <9W |
Dimensions (LxWxH) | 10.94 x 3.78 x 3.50 inches (278 x 96 x 89 mm) |
Net Weight | 2.6lbs, 1.2Kg |
Installation | Wall mounting, Ceiling mounting, Tripod mounting |
Certification | Certification testing is pending for major markets, including North America and the European Union. |
EXTERNAL TEMPERATURE REFERENCE SOURCE (ETRS) CALIBRATOR | |
Temperature Range | 20.0°C to 70.0°C (68°F to 158°F) |
Emissive Area | 100mm x 100mm |
Display Resolution | 0.01°C (0.0018°F) |
Radiance temperature expanded uncertainty | ± 0.25°C between 33°C and 40°C (± 0.45°F between 91.4°F and 104°F) |
Stability | ± 0.05°C (± 0.09°F) |
Emissivity | 0.96 |
Power Supply | 110 -240 VAC compatible. 50/60 Hz. |
Net Weight | 2kg (4.4lbs) |
Calibration Certificate | 24 months from manufacturing |
Camera Part Numbers
Model No. | |
IPT05-B29-BNDA3 | Dual imager temperature detection camera, Visible/Thermal, 5MP/384*288, 8mm/12mm, 20M IR, sound-light alarm, Alarm/Audio, Micro SD, DC/PoE, IP66, with Additional External Temperature Reference Source (ETRS) |
Request more information / quote